K1000C LED Controller Software & Information

Pixel LED Controller - K1000C

K-1000C system features:

  • 32 to 65536 degree Gray control
  • Gamma correction procession handle
  • Support various point, line light source, and all kinds of rules and specifically shaped handle
  • The controller has one output port, can support up to 512/2048 pixels (DMX lighting support up to 512 pixels)
  • Play content stored in the SD card, the SD card can store up to 32 effects File, SD card capacity supports 128MB-32GB
  • The controller can be used as a single set or multiple controllers cascade
  • Cascade optical isolation mode for better stability
  • Cascade distance between two controllers can reach up to 150 meters, using 0.5M2 pure copper power cord
  • The controller supports locking the support IC in software or not locking the support IC in the software
  • Select the support IC through the controller CHIP button
  • For the DMX lighting IC, the controller comes with write address function
  • Support load lamp is 4 channels (RGBW) pixels or split into single channel point pixels
  • Enhanced 485 TTL and 485 differential (DMX) signal output


  1. The controller load lamps 512 points pixel, speed can reach up to 30 frames/sec
  2. 1024 point pixel speed can reach up to 25 frames/sec
  3. 2048 point pixel speed is about 15 frames/sec (the above parameter is an example of 1903 agreement IC, different ICs may vary)
  4. International standard DMX512 (1990 agreement) maximum support 512 pixels
  5. When the load is international standard 170


K1000C Image

K-1000C Pixel LED Controller Software:

To create programs for your LED Controller, you will need LedEdit Software. Check the tutorial below to install and use the software.


For more information, please refer to the instruction manual you can download below.

K1000C PDF Manual