T-8000A LED Controller Guide
The T-8000A is a professional-grade LED controller designed for large-scale LED pixel installations. With support for DMX and Art-Net protocols, 8 output ports, and advanced network control capabilities, this controller is ideal for professional shows and large installations.
Technical Specifications
| Specification | Details |
|---|---|
| Output Ports | 8 |
| Max Pixel Control | 8192 pixels (1024 per port) |
| Compatible LEDs | WS2811, WS2812B, SK6812, APA102, TM1804, UCS1903, etc. |
| Input Voltage | DC 5V-24V |
| Output Protocol | DMX/Art-Net |
| Network Interface | Ethernet (10/100Mbps) |
| Dimensions | 88×48×25mm |
| Memory | On-board storage for multiple programs |
| SD Card Support | Micro SD up to 32GB |
| Clock Function | Built-in RTC with scheduling capabilities |
⚠️ Important Compatibility Notes:
- 💾 Make sure your SD card is compatible with the controller - some models only accept older SD cards
- ⚠️ Old and cheap T1000 models work only with LEDEdit 2014!
- ❓ Ask your seller about software support
- 🔍 Check maximum LED count in software - some chips can have different maximum values!
Key Features
- Multi-Port Control: 8 independent output ports
- Network Control: Full DMX and Art-Net protocol support
- Advanced Effects: Complex animation and pattern support
- SD Card Support: Store and retrieve multiple effect programs
- Clock Function: Set scheduled program changes with built-in RTC
- Enhanced Stability: Reliable operation in professional environments
- Remote Management: Web interface for configuration and control
Connection Guide
The T-8000A features comprehensive connections:
- Power Input: Connect DC 5V-24V power supply (match to your LED voltage)
- LED Outputs: 8x 3-pin connectors (GND, DATA, +V)
- Network Port: Ethernet connection for DMX/Art-Net control
- SD Card Slot: For storing and playing programs
- Status LEDs: Power, network, and data activity indicators
Wiring Recommendations
- Use high-quality shielded data cables for improved signal integrity
- Maximum recommended data line length is up to 7 meters per port
- For runs over 5 meters, consider using signal amplifiers
- Use proper power injection for installations over 5 meters
- Match power supply voltage to your LED strip requirements
- Implement proper network cable shielding for DMX/Art-Net connections
Setup Guide
Basic Setup
- Insert SD card with your program
- Connect power supply
- Connect LED strips to desired output ports
- Connect network cable for DMX/Art-Net control
- Power on the controller
Network Configuration
The T-8000A supports multiple network control options:
DMX Mode:
- Configure DMX universe and channel settings
- Set DMX start address for each output port
- Configure DMX timing parameters
Art-Net Mode:
- Set Art-Net subnet and universe
- Configure IP address and network settings
- Set Art-Net timing parameters
SD Card Management
The T-8000A supports SD card storage for multiple programs:
- Format a micro SD card to FAT32 (32GB or smaller)
- Save your programs to the SD card
- Insert the SD card into the controller
- Use the controller menu or web interface to select programs
Troubleshooting Common Issues
No LEDs Lighting Up
- Verify power connections to both controller and LED strips
- Check that LED strip voltage matches controller power supply
- Ensure correct data pin connection
- Test with a simple one-color program
- Verify output port selection
Network Control Issues
- Check network cable connections
- Verify IP address configuration
- Check DMX/Art-Net settings
- Ensure network switch/router compatibility
- Test with different network ports
Flickering or Unstable Operation
- Check for proper grounding between power supply and LED strips
- Verify data signal integrity with shorter or higher quality cables
- Ensure power supply has sufficient capacity for your installation
- Check for interference from nearby electrical equipment
- Verify network timing settings
Comparison with Other Controllers
| Feature | T-8000A | T-1000S | K-1000C | K-8000C |
|---|---|---|---|---|
| Output Ports | 8 | 1 | 1 | 8 |
| Max Pixels | 8192 | 2048 | 2048 | 8192 |
| Protocol | DMX/Art-Net | SPI | DMX/SPI | DMX/Art-Net/sACN |
| SD Card | Yes | Yes | Yes | Yes |
| Network Control | Yes | No | Yes | Yes |
| Price Range | High | Low | Mid | High |
Professional Applications
The T-8000A is ideal for:
- Large Venues: Stadiums, theaters, and concert halls
- Architectural Lighting: Large building facades and structures
- Professional Shows: Stage and event lighting
- Theme Parks: Large-scale entertainment installations
- Commercial Displays: Shopping centers and public spaces
Resources and Support
- LED Edit Effects - Download compatible effects
Conclusion
The T-8000A offers professional-grade features with support for both DMX and Art-Net protocols, making it suitable for large-scale installations requiring advanced control capabilities. With its 8 output ports and 8192 pixel capacity, it provides comprehensive control for professional applications.
For installations requiring additional features like sACN support or cloud control, consider the K-8000C controller which offers similar capabilities with enhanced networking features.